Selective Call Rejection

<< Back to Calling Features Instructions

How it works:

You can program your phone to reject calls from any number you place on the rejection list. When your service is "on," any callers on this list will hear an announcement that you are not accepting calls at this time. All other calls will ring through as usual. Cost of Selective Call Rejection is $2.50 per month.

How to Use:

1. Lift the handset and listen for dial tone.
2. Press *60. (On a rotary phone, dial 1160.)
3. Listen for an announcement telling you whether the feature is currently on or off. The recorded voice will then tell you how many (if any) numbers are currently stored on your rejection list.
4. Follow the voice instructions and dial or press 3 to turn the feature ON (if it is currently off), or turn the feature OFF (if it is currently on).

To add the last caller to your list:

1. Press #01#. (On a rotary phone, dial 1201.)

To hear the phone numbers on your list:

1. Dial or press 1.
2. After the list is read, voice instructions will follow.

To add a number to your list:

1. Press #. (On a rotary phone, dial 12.)
2. Follow the voice instructions you will hear. You can store up to 5 phone numbers on your rejection list.

To remove a number from your list:

1. Press *. (On a rotary phone, dial 11.)
2. Follow the instructions to remove any or all of those numbers from your rejection list.

To hear instructions again:

1. Dial or press 0.

Note:

• You will not be notified when or how many calls have been rejected.
• You may press 1, 0, #, or * at any time rather than waiting for the voice instructions.
• The list you create here is separate from any other lists you may be using for Distinctive Ringing, Selective Call Acceptance, Selective Call Forwarding and similar services.